Create a map

Insights in ArcGIS Online
Insights in ArcGIS Enterprise
Insights desktop

In Insights, you can create interactive maps to display geographic data.

To create a map, you must add data to your page. A map is created by default when you add data from a feature layer, including layers from ArcGIS Living Atlas of the World.

Note:

If the dataset you added doesn't contain geographic data, you must enable location before you can create a map. For more information, see Enable locations for your data.

To create interactive maps, drag a dataset with a location field from the data pane to the page and drop it on the Map drop zone. You can also select an individual string, number, or rate/ratio field and drag it onto the page, or use the Map button Map at the top of the data pane.

Drag to create a map
Tip:

Drag-N Drop You can copy a map card onto another page by dragging it to the New page tab New page or an already created page. If you want to copy the map onto the same page, use Ctrl+C to copy and Ctrl+V to paste.

The field type that you select determines the type of map you create. You can also switch to a map from an existing chart or table. The type of map you switch to depends on the data inputs from the existing card. For example, a bar chart switches to a category map. A histogram switches to a graduated symbol map.

To learn more about the data requirements for each map type, as well as examples and information on settings you can change and interact with, see the individual map topics.

After you have a map on your page, you can begin exploring your data using spatial analysis or change the style of your map.

A warning icon Warning indicates that the map is not displaying all of the features from the dataset. The warning will be displayed for maps with more than 100,000 features within the map extent. Click on the icon to display the number of features being rendered. The complete dataset will still be used for spatial analysis, provided there are no filters or selections, even if the full dataset is not being rendered.

Tip:

If you are using a point dataset, switching to a binned map will allow you to display all of the data.

Map types

Insights uses smart mapping to create the best type of map for the data you want to visualize, so you know you are always getting the best type of map for the field that you are mapping.

The table below indicates the inputs for each map, related visualizations you can switch to using the Visualization type button Visualization type, and questions the map can help you answer.

VisualizationData typesRelated visualization typesQuestions it can help you answer

Binned map

Point data (required) and number or rate/ratio field (optional).

  • Heat map
  • Location map
  • Summary table
  • Reference table
  • KPI
  • Histogram
  • Bar chart
  • Column chart
  • Treemap
  • Bubble chart
  • Line graph
  • Box plot
  • Donut chart

Where is it located?

How is it distributed?

Where are high values?

Where are low values?

Choropleth map

Number or rate/ratio field.

  • Graduated symbol map
  • Summary table
  • Reference table
  • KPI
  • Histogram
  • Box plot

How is it distributed?

Column chart symbols

Multipart features and a string field.

  • Unique values maps
  • Pie chart symbols
  • Summary table
  • Reference table
  • Bar chart
  • Stacked bar chart
  • Column chart
  • Stacked column chart
  • Treemap
  • Heat chart
  • Chord diagram
  • Data clock
  • Link chart
  • Line graph

Where is it located?

How is it distributed (by category)?

Heat map

Point data.

  • Binned map
  • Location map
  • Summary table
  • Reference table
  • KPI
  • Histogram
  • Box plot

How is it distributed?

Link map

Two location fields.

  • Summary table
  • Reference table
  • Bar chart
  • Stacked bar chart
  • Column chart
  • Stacked column chart
  • Treemap
  • Heat chart
  • Chord diagram
  • Data clock
  • Link chart
  • Line graph

How is it related?

Location map

One location field.

  • Binned map
  • Heat map
  • Summary table
  • Reference table
  • Bar chart
  • Column chart
  • Treemap
  • Bubble chart
  • Line graph
  • Donut chart

Where is it located?

How is it distributed?

Pie chart symbols

Multipart features and a string field.

  • Unique values maps
  • Column chart symbols
  • Summary table
  • Reference table
  • Bar chart
  • Stacked bar chart
  • Column chart
  • Stacked column chart
  • Treemap
  • Heat chart
  • Chord diagram
  • Data clock
  • Link chart
  • Line graph

Where is it located?

How is it distributed (by category)?

Graduated symbol map

One number field.

  • Choropleth map
  • Summary table
  • Reference table
  • KPI
  • Histogram
  • Box plot

Where is it located?

How is it distributed?

Where are high values?

Where are low values?

Unique values map

One string field.

  • Summary table
  • Reference table
  • KPI
  • Bar chart
  • Column chart
  • Treemap
  • Bubble chart
  • Line graph
  • Donut chart

Where is it located?

How is it distributed (by category)?

Change or remove a basemap

For Insights in ArcGIS Online and Insights in ArcGIS Enterprise, the default basemap used for your map cards will be the same as the default basemap in your ArcGIS organization. For Insights desktop, the Light Gray Canvas and Dark Gray Canvas basemaps are included in the install, but other basemaps are available when signed in to an ArcGIS organization.

You can change the basemap for your map cards using the Basemaps menu button Basemaps on the page toolbar.

Note:

If a map card is activated then changing the basemap will update only the active card. If no map cards are active then all of the maps will have their basemap changed. A map card is active when you see the map toolbar and the Action button Action.

To remove the basemap layers from a map card, complete the following steps:

  1. On the map toolbar, click the Card options button Card options.
  2. On the side menu, click the Appearance button Appearance.
  3. Click the Map options tab Map options.
  4. Under Basemap layers, deselect the layers you want to remove from the map.

Add or remove a layer

Maps represent data from different datasets as separate layers. A new layer can be added to the map by dragging a field from a different dataset to the Add new layer drop zone on an existing map.

A layer can be deleted from a map by expanding the Layer options pane Expand legend and clicking the Delete button Delete. You can also temporarily turn off a layer on a map by clicking the layer symbol next to the layer name in the legend.

Use the map toolbar

Every map has a toolbar that can be used to find more information or manipulate the data or card.

ToolDescription

Layer options

The Layer options button Legend can be used to show or hide the name and symbol of datasets being displayed on the map. The Layer options pane gives access to the legend, symbology, and appearance for the layer.

Note:

Hidden layers will remain hidden if the report is published.

Card filter

Use the Card filter button Card filter to remove any unwanted data from your chart. Filters can be applied to all string, number, rate/ratio, and date/time fields. A card filter does not affect other cards using the same dataset.

For more information, see Filter data.

Selection tools

Selection tools (accessed with the Selection tools button Selection tools) can be used to highlight important features. Selections on one card are reflected on any other card using the same data. The following selection tools are available on map cards:

  • Select
  • Box select
  • Lasso
  • Zoom to selection
  • Invert selection

For more information, see Make selections.

Zoom tools

Zoom tools (access with the Zoom tools button Zoom tools) can be used to change the extent of your data. The following zoom tools can be used on map cards:

  • Zoom in
  • Zoom out
  • Zoom to selection
  • Set default extent and Clear default extent
  • Zoom to layer
  • Lock navigation and Unlock navigation

Tip:

You can also zoom using Shift + click + drag.

For more information, see Navigate maps.

Visualization type

The Visualization type button Visualization type opens a drop-down menu that shows all available card types. The drop-down list can be used to quickly change your card to a summary table or chart. The availability of visualizations depends on what type of data is being displayed on your card.

Sync extents

The Sync extents button Sync extents can be used to display all maps at the same extent and zoom level.

Maximize

Use the Maximize button Maximize to enlarge the card. Other cards on the page will be reduced to thumbnails. The card can be returned to its previous size using the Restore down button Restore down.

Enable cross filters

Use the Enable cross filters button Enable cross filters to allow filters to be created on the card using selections on other cards. Cross filters can be removed using the Disable cross filters button Disable cross filters.

For more information, see Filter data.

Flip card

The Flip card button Flip card flips the card to display information about the layers on your map, such as the count of features, the timestamp for when the data was last updated, and the references for the basemap. There is also a space for you to describe the analysis on the card.

Card options

Use the Card options button Card options to change the appearance or order of the card, or delete the card.

Copy a map

A map card can be duplicated on a page by activating the card (a card is active when the Action button Action is visible) and using Ctrl+C to copy the card and Ctrl+V to paste it on the page.

A map card can be copied to a different page by dragging the card to the New page tab New page or to an existing page. When a map is copied to a new page, the dataset will also be copied, if necessary, along with all of the processes used to create the map. The dataset will not be copied if it already exists on the new page unless one of the datasets contains a dataset filter, a calculated field, or a location field created by enabling location.

Limitations

A maximum of 16 maps using vector tile basemaps are supported per page. It is best practice to use multiple pages with fewer maps on each page. For more information, see Error: Too many WebGL contexts. Unable to add the layer.

Troubleshooting

If a feature layer is added to a map but no features are visible, the map scale may be outside of the visible range. If a layer is outside of the visible range, the symbol on the layer list is disabled and the message Only visible at certain scales appears when you hover your pointer over the layer. Try zooming in and out on the map to see if the layer appears at a different scale. Depending on the visible range, you may need to use the zoom tools to zoom to a scale where the layer is visible. You can also lock navigation on the map at a scale where the layer is visible, if necessary.

Some basemaps also have visible ranges. If the basemap is not visible, try zooming in or out until the basemap appears or switch to a different basemap.

Resources

Use the following resources to learn more: