Upgrade ArcGIS Monitor

All ArcGIS Monitor machines in your deployment must be upgraded to the same version.

Prepare to upgrade Monitor

Carefully review the following information and complete any required actions before you upgrade Monitor:

• If necessary, obtain new authorization files from My Esri and apply them to the ArcGIS Monitor Server machine in your deployment before upgrading.
• Review the Monitor system requirements to ensure that your hardware meets the current requirements.
• Create a backup of the Monitor database and all Monitor machines in the deployment, and store the backup files in a secure, remote location.
• Download the latest ArcGIS Monitor software installation files from My Esri.
• Do not uninstall the previous version of ArcGIS Monitor Server or ArcGIS Monitor Agent. Running the setup automatically upgrades Monitor Server or Monitor Agent. There is no need to obtain and install each previously released version in sequence.

  Note:

  Only one version can be installed on a machine at a time; when you install a new version, the old version is replaced.

• For Monitor Agent machines to function, they must be the same version as the Monitor Server machine.
• Stop the arcgis-monitor service on all Monitor Server and Monitor Agent machines using one of the following commands before you upgrade Monitor.
  • Ubuntu: sudo service arcgis-monitor stop
  • Red Hat Enterprise Linux Server: sudo systemctl stop arcgis-monitor
  Monitoring is not available when the Monitor services are stopped.

Monitor upgrade order

The recommended order to upgrade the components in your Monitor deployment is as follows:

1. Upgrade Monitor Server.
2. Upgrade Monitor Agent.

Steps to upgrade Monitor Server

Once you have your installation files and backup files, complete the upgrade steps for Monitor Server. Do not uninstall Monitor Server before installing the new version.

You can upgrade using an interactive command line interface (CLI), or silently upgrade Monitor Server from the CLI. No matter which method you use, the setup package detects and updates the existing installation of Monitor Server.

Upgrade using an interactive CLI

After you complete the prerequisites outlined in the Prepare to upgrade Monitor section, complete these steps to upgrade Monitor Server using an interactive CLI. To perform a silent upgrade instead, proceed to the next section.

1. Start a terminal session with administrative privileges and ensure that the user account has full permissions to the Monitor Server installation directory.

   The default installation directory is /usr/lib/arcgis/monitor.

   Do not uninstall the existing Monitor Server installation.

2. Change the directory to the location that contains the Monitor .tar.gz file and uncompress it.

   For example, use tar -zxvf ArcGIS_Monitor.tar.gz.

3. Change the directory to the location that contains the extracted setup file and make it an executable file.

   For example, use sudo chmod +x ArcGIS-Monitor-server-<Version>-<deb or rpm>.bin.

4. From the command shell, run ArcGIS-Monitor-server-<Version>-<deb or rpm>.bin with elevated privileges.

   For example, use sudo ./ArcGIS-Monitor-server-<Version>-<deb or rpm>.bin.

5. During the installation, read the license agreement and accept it, or exit if you do not agree with the terms.

   Tip:

   Press Q to close the Master Agreement.

6. Follow the prompts on the screen to install the software.
7. After the installation has finished, verify that the arcgis-monitor service is running and start the service if necessary.
   1. Run one of the following commands to check the status of the service:
      • Ubuntu: sudo service arcgis-monitor status
      • Red Hat Enterprise Linux Server: sudo systemctl status arcgis-monitor
   2. If necessary, run one of the following commands to start the service:
      • Ubuntu: sudo service arcgis-monitor start
      • Red Hat Enterprise Linux Server: sudo systemctl start arcgis-monitor
8. Once you have updated the Monitor Server installation, open a supported web browser, access Monitor, and verify that the software is updated and licensed.

Upgrade silently from the CLI

Rather than run the interactive CLI, you can upgrade Monitor Server silently.

After you complete the prerequisites outlined in the Prepare to upgrade Monitor section, complete these steps to upgrade Monitor Server:

1. Start a terminal session with administrative privileges and ensure that the user account has full permissions to the Monitor Server installation directory.

   The default installation directory is /usr/lib/arcgis/monitor.

   Do not uninstall the existing Monitor Server installation.

2. Change the directory to the location that contains the Monitor .tar.gz file and uncompress it.

   For example, use tar -zxvf ArcGIS_Monitor.tar.gz.

3. Change the directory to the location that contains the extracted setup file and make it an executable file.

   For example, use sudo chmod +x ArcGIS-Monitor-server-<Version>-<deb or rpm>.bin.

4. From the command shell, run ArcGIS-Monitor-server-<Version>-<deb or rpm>.bin with elevated privileges.

   The --license-agreement parameter is required to accept the End User License Agreement (EULA) during a silent installation. Specify yes to agree to the EULA and install the software. Specifying no results in a failed installation.

   For example, use sudo ./ArcGIS-Monitor-server-<Version>-<deb or rpm>.bin -l yes [options].

   -l; --license-agreement CHOICE	Required for silent mode. CHOICE is either Yes or No. Yes indicates that you have read and agreed to the Esri Master Agreement (E204, E300).
   --nox11	Runs the installer without opening an xterm window.

5. After the installation has finished, verify that the arcgis-monitor service is running and start the service, if necessary.
   1. Run one of the following commands to check the status of the service:
      • Ubuntu: sudo service arcgis-monitor status
      • Red Hat Enterprise Linux Server: sudo systemctl status arcgis-monitor
   2. If necessary, run one of the following commands to start the service:
      • Ubuntu: sudo service arcgis-monitor start
      • Red Hat Enterprise Linux Server: sudo systemctl start arcgis-monitor
6. Once you have updated the Monitor Server installation, open a supported web browser, access Monitor, and verify that the software is updated and licensed.

Steps to upgrade Monitor Agent

Once you have your installation files and backup files, complete the upgrade steps on each Monitor Agent machine in your Monitor deployment. All Monitor Agent machines in your deployment must run the same Monitor release. Do not uninstall Monitor Agent before installing the new version.

You can upgrade using an interactive CLI, or silently upgrade Monitor Agent from the CLI. No matter which method you use, the setup package detects and updates the existing installation of Monitor Agent.

Upgrade using an interactive CLI

After you complete the prerequisites outlined in the Prepare to upgrade Monitor section, complete these steps to upgrade Monitor Agent using an interactive CLI. To perform a silent upgrade instead, proceed to the next section.

1. Start a terminal session with administrative privileges and ensure that the user account has full permissions to the Monitor Agent installation directory.

   The default installation directory is /usr/lib/arcgis/monitor.

   Do not uninstall the existing Monitor Agent installation.

2. Change the directory to the location that contains the Monitor .tar.gz file and uncompress it.

   For example, use tar -zxvf ArcGIS_Monitor.tar.gz.

3. Change the directory to the location that contains the extracted setup file and make it an executable file.

   For example, use sudo chmod +x ArcGIS-Monitor-agent-<Version>-<deb or rpm>.bin.

4. From the command shell, run ArcGIS-Monitor-agent-<Version>-<deb or rpm>.bin with elevated privileges.

   For example, use sudo ./ArcGIS-Monitor-agent-<Version>-<deb or rpm>.bin.

5. During the installation, read the license agreement and accept it, or exit if you do not agree with the terms.

   Tip:

   Press Q to close the Master Agreement.

6. Follow the prompts on the screen to install the software.
7. After the installation has finished, verify that the arcgis-monitor service is running and start the service, if necessary.
   1. Run one of the following commands to check the status of the service:
      • Ubuntu: sudo service arcgis-monitor status
      • Red Hat Enterprise Linux Server: sudo systemctl status arcgis-monitor
   2. If necessary, run one of the following commands to start the service:
      • Ubuntu: sudo service arcgis-monitor start
      • Red Hat Enterprise Linux Server: sudo systemctl start arcgis-monitor
8. Once you have updated the Monitor Agent installation, open a supported web browser, access Monitor, and verify that the Monitor Agent machine is connected to Monitor Server.

Upgrade silently from the CLI

Rather than run the interactive CLI, you can upgrade Monitor Agent silently.

After you complete the prerequisites outlined in the Prepare to upgrade Monitor section, complete these steps to upgrade Monitor Agent:

1. Start a terminal session with administrative privileges and ensure that the user account has full permissions to the Monitor Agent installation directory.

   The default installation directory is /usr/lib/arcgis/monitor.

   Do not uninstall the existing Monitor Agent installation.

2. Change the directory to the location that contains the Monitor .tar.gz file and uncompress it.

   For example, use tar -zxvf ArcGIS_Monitor.tar.gz.

3. Change the directory to the location that contains the extracted setup file and make it an executable file.

   For example, use sudo chmod +x ArcGIS-Monitor-agent-<Version>-<deb or rpm>.bin.

4. From the command shell, run ArcGIS-Monitor-agent-<Version>-<deb or rpm>.bin with elevated privileges.

   The --license-agreement parameter is required to accept the End User License Agreement (EULA) during a silent installation. Specify yes to agree to the EULA and install the software. Specifying no for this parameter results in a failed installation.

   For example, use sudo ./ArcGIS-Monitor-agent-<Version>-<deb or rpm>.bin -l yes [options].

   -l; --license-agreement CHOICE	Required for silent mode. CHOICE is either Yes or No. Yes indicates that you have read and agreed to the Esri Master Agreement (E204, E300).
   --nox11	Runs the installer without opening an xterm window.

5. After the installation has finished, verify that the arcgis-monitor service is running and start the service, if necessary.
   1. Run one of the following commands to check the status of the service:
      • Ubuntu: sudo service arcgis-monitor status
      • Red Hat Enterprise Linux Server: sudo systemctl status arcgis-monitor
   2. If necessary, run one of the following commands to start the service:
      • Ubuntu: sudo service arcgis-monitor start
      • Red Hat Enterprise Linux Server: sudo systemctl start arcgis-monitor
6. Once you have updated the Monitor Agent installation, open a supported web browser, access Monitor, and verify that the Monitor Agent machine is connected to Monitor Server.

Considerations after upgrading

Monitor backups that you created before upgrading cannot be used to restore a Monitor deployment. It is recommended that you create a backup of the Monitor database and all Monitor machines in the deployment after upgrading. After upgrading, confirm that your deployment is collecting data as expected by accessing Monitor and viewing collection details and component details.