The output data types containing the results from a waste collection analysis are described below.
Stops
The output is a copy of the input Stops table with additional information about which route served each stop and the stop sequence along the route.
The output Stops table includes all fields from the input Stops table. Fields that are updated or added to the output are listed in the following table:
| Field | Description | Data type |
|---|---|---|
ObjectID | フィーチャのオブジェクト ID。 | ObjectID |
RouteName | The name of the route to which the stop is assigned. This field corresponds to the Name field in the output Routes table. | Text |
Sequence | The sequence of the stop on its assigned route. Output sequence values for a route are shared across renewal visits and stops. The sequences start from 1 for the first stop on the route. | Long |
RouteLineID | The ObjectID value of the output RouteLines feature that serves this stop. This associates the individual stop locations with the further details of the route plan, such as when the vehicle will be collecting on this street. | Long |
These fields contain a summary of violated constraints and are set after a solve operation. Each field will contain one violation. If a stop has more than one violation, the next ViolatedConstraint_* field will be used.
Learn more about troubleshooting network analyses 注意:The violated constraint field value of an unrouted stop may or may not describe all its violations. If the violation is severe enough to immediately exclude the stop from further consideration, the solver does so, which prevents any other violations from being discovered for that stop. If a violation is encountered that doesn't automatically stop a solution from being generated, the violation is noted in violated constraint fields, and the solver continues to consider the stop. Any further violations such as these are added to the violated constraint fields until either the solver finds a violation that prematurely stops the solve process for that particular stop, or the solver finds an overall solution to the problem. | Long | |
Status | ネットワーク上の位置を基準としたその地点のステータスと解析の結果を指定します。 出力される可能性のある値は次のとおりです。
| Long |
Network location fields
| これらのプロパティを組み合わせて、オブジェクトが配置されているネットワーク上のポイントを表します。 |
Depots
The output is a copy of the input Depots table with additional information about how the depots were located on the network.
The output Depots table includes all fields from the input Depots table. Only fields that are added to the output are listed in the following table:
| Field | Description | Data type |
|---|---|---|
ObjectID | フィーチャのオブジェクト ID。 | ObjectID |
Status |
ネットワーク上の位置を基準としたその地点のステータスと解析の結果を指定します。 出力される可能性のある値は次のとおりです。
| Long |
Network location fields
| これらのプロパティを組み合わせて、オブジェクトが配置されているネットワーク上のポイントを表します。 |
Routes
These are the output routes. The routes describe the region each route will operate, the amount of waste collected, and the travel time and distance.
The output Routes table includes all fields from the input Routes table as well as additional fields describing how each route serviced the stops. Only fields that are added to the output are listed below.
| Field name | Description | Data type |
|---|---|---|
ObjectID | フィーチャのオブジェクト ID。 | ObjectID |
Describes constraints violated by the route. The constraints are given as integers as described in the list below.
| Long | |
StopCount | The number of stops serviced by this route. | Long |
RenewalCount | The number of renewal visits needed by this route. | Long |
TotalBins_1 | The total number of bins for fraction 1 serviced by this route. | Double |
TotalWeight_1 | The total physical weight of waste for fraction 1 collected by this route. | Double |
TotalVolume_1 | The total volume of waste for fraction 1 collected by this route. | Double |
TotalBins_2 | The total number of bins for fraction 2 serviced by this route. | Double |
TotalWeight_2 | The total physical weight of waste for fraction 2 collected by this route. | Double |
TotalVolume_2 | The total volume of waste for fraction 2 collected by this route. | Double |
TotalTime | The total route duration. This includes travel time as well as service times at stops, renewals, and starting and ending depots. The value is in the units specified by the timeUnits property of the analysis object. | Double |
TotalTravelTime | ルートの合計移動時間。 The value is in the units specified by the timeUnits property of the analysis object. | Double |
TotalStopServiceTime | The total service time spent at all stops on the route. The value is in the units specified by the timeUnits property of the analysis object. | Double |
TotalDistance | ルートの合計移動距離。 The value is in the units specified by the distanceUnits property of the analysis object. | Double |
EndTime | The ending time of the route. The route ends upon completion of service at the ending depot. This end time reflects the travel times that were used during the optimization by the solver. | Time Only |
RouteLines
The output route lines describing the paths taken through the network to visit the stops.
| Field name | Description | Data type |
|---|---|---|
ObjectID | フィーチャのオブジェクト ID。 | ObjectID |
RouteName | The name of the route with which this route segment is associated. The RouteName field is a foreign key to the Name field in the Routes class. | Text |
CollectionSequence | The sequence of the route's collection segments. | Long |
Activity | Indicates whether the driver collected bins while traversing the route segment. The constraints are given as integers as described in the list below.
| Long |
ArriveTime | The time the route starts traversing this route segment in the time zone of the route's starting depot. | Time Only |
DepartTime | The time the route finishes traversing this route segment in the time zone of the route's starting depot. For collection segments, the depart time includes the service time of stops visited on this route segment. For stem segments, the service time at the renewal or depot is not included, because that is accounted for at the renewal or depot location and not on the route segment. | Time Only |
StopCount | The number of stops from which to collect waste on this route segment. This field is null if no waste is to be collected. | Long |
Bins_1 | The number of bins for fraction 1 to collect on this route segment. If the route traverses this route segment without collecting waste, this field will be null. | Double |
Weight_1 | The physical weight of waste for fraction 1 to collect on this route segment. If the route traverses this route segment without collecting waste, this field will be null. | Double |
Volume_1 | The volume of waste for fraction 1 to collect on this route segment. If the route traverses this route segment without collecting waste, this field will be null. | Double |
Bins_2 | The number of bins for fraction 2 to collect on this route segment. If the route traverses this route segment without collecting waste, this field will be null. | Double |
Weight_2 | The physical weight of waste for fraction 2 to collect on this route segment. If the route traverses this route segment without collecting waste, this field will be null. | Double |
Volume_2 | The volume of waste for fraction 2 to collect on this route segment. If the route traverses this route segment without collecting waste, this field will be null. | Double |
ReportGrouping | This field is used to group route segments in output waste collection reports to allow for close-up maps for each group. | Long |
Renewals
The output is a copy of the input Renewals table with additional information about how the renewals were located on the network.
The output Renewals table includes all fields from the input Renewals table. Only fields that are added to the output are listed in the following table:
| Field | Description | Data type |
|---|---|---|
ObjectID | フィーチャのオブジェクト ID。 | ObjectID |
Status |
ネットワーク上の位置を基準としたその地点のステータスと解析の結果を指定します。 出力される可能性のある値は次のとおりです。
| Long |
Network location fields
| これらのプロパティを組み合わせて、オブジェクトが配置されているネットワーク上のポイントを表します。 |
RenewalVisits
This is each instance of a renewal being visited by a route, including the time of the visit and information about the amount of waste unloaded at the renewal. A maximum of three renewal visits per route is supported.
| Field | Description | Data type |
|---|---|---|
ObjectID | フィーチャのオブジェクト ID。 | ObjectID |
RouteName |
The name of the route this renewal applies to. The value of this field corresponds to a value in the Name field of a route in the Routes output class. | Text |
RenewalName | The name of the renewal where the truck was unloaded. The value of this field corresponds to a value in the Name field of a route in the Renewals output class. | Text |
Sequence | The sequence of the visited renewal along the route. | Long |
ArriveTime | The arrival time at the renewal. | Time Only |
DepartTime | The departure time from the renewal. | Time Only |
UnloadedBins_1 | The number of bins collected for fraction 1 unloaded at the renewal. | Double |
UnloadedWeight_1 | The physical weight of waste for fraction 1 unloaded at the renewal. | Double |
UnloadedVolume_1 | The volume of waste for fraction 1 unloaded at the renewal. | Double |
UnloadedBins_2 | The number of bins collected for fraction 2 unloaded at the renewal. | Double |
UnloadedWeight_2 | The physical weight of waste for fraction 2 unloaded at the renewal. | Double |
UnloadedVolume_2 | The volume of waste for fraction 2 unloaded at the renewal. | Double |
DirectionPoints
解析で算出されたルートに対して出力されるルート案内を指定します。特定のルート案内イベントまたはマヌーバーが発生したルートに沿ったポイント位置として表されます。
| Field name | Description | Data type |
|---|---|---|
ObjectID | フィーチャのオブジェクト ID。 | ObjectID |
RouteID | The ObjectID value of the output Routes feature with which this direction point is associated. | Long |
Sequence | 該当するルートのルート案内ポイントの順番 (1 から始まる)。 | Long |
DirectionPointType | ポイントで記述されたルート案内イベントまたはマヌーバー タイプを指定します。次のいずれかの値で表されます。
| Long |
RenewalID | The ObjectID value of the output Renewals feature with which this direction point is associated. | Long |
DisplayText | 使用中のアプリケーションで表示されるルート案内テキスト。 | Text |
ArrivalTime | UTC (協定世界時) でのルート案内イベントの発生時刻。 | Date |
ArrivalUTCOffset | マヌーバー位置の現地時間と ArrivalTime フィールドに示された UTC 時間との差異 (分単位)。 | Double |
Name | ルート案内ポイントの名前。 | Text |
ExitName | ルート案内指示に表示される高速道路出口名。 | Text |
AlternateName | ルート案内指示に表示される代替ソース名。 | Text |
IntersectingName | ルート案内指示に表示される交差点または交差道路の名前。 | Text |
BranchName | ルート案内指示に表示される分岐標識名。 | Text |
TowardName | ルート案内指示に表示される目的地までの方向標識名。 | Text |
Level | 該当するルート案内イベントが発生した建物の階。 この値は、解析用のネットワーク データセット内に定義された Level プロパティに相当します。 | Long |
ShortVoiceInstruction | 使用中のアプリケーションで音声ガイダンス テキストとして使用される短い形式のテキスト。 | Text |
VoiceInstruction | 使用中のアプリケーションで音声ガイダンス テキストとして使用される追加のテキスト (展開された略語と複数形の語句を含む)。 | Text |
Azimuth | この地点を出発する車両の方位 (度単位)。 ゼロは北を示します。 | Double |
FromIntersectingName | The name of the intersecting cross street where the collection will start. | Text |
ToIntersectingName | The name of the intersecting cross street where the collection will end. | Text |
DirectionLines
これは、解析で算出され、DirectionPoints イベント位置間またはマヌーバー位置間の各ルート セグメントを表すためにスライスされた出力ルート ラインです。
| フィールド名 | 説明 | データ タイプ |
|---|---|---|
ObjectID | フィーチャのオブジェクト ID。 | ObjectID |
DirectionPointID | 該当するラインが関連付けられている DirectionPoints テーブル内のフィーチャの ObjectID 値。 | Long |
RouteID | 該当するルート案内ラインが関連付けられている出力 Routes フィーチャの ObjectID 値。 | Long |
DirectionLineType | 該当するラインで記述されたルート案内状況のタイプを指定します。次のいずれかの値で表されます。
| Long |
Meters | メートル単位で計測されたライン セグメントの長さ。 | Double |
Minutes | 分単位でのライン セグメントに沿った移動時間。 | Double |
FromLevel | 該当するルート案内イベントが始まる建物の階。 この値は、解析用のネットワーク データセット内に定義された Level プロパティに相当します。 | Long |
ToLevel | 該当するルート案内イベントが終わる建物の階。 この値は、解析用のネットワーク データセット内に定義された Level プロパティに相当します。 | Long |