Label | Explanation | Data Type |
Input Mosaic Dataset | The mosaic dataset on which the stereo model will be built. Tip:Running the Apply Block Adjustment tool on the input mosaic dataset first will help create a more accurate stereo model. | Mosaic Dataset; Mosaic Layer |
Minimum Intersection Angle (in degree) (Optional) | The value, in degrees, that defines the minimum angle the stereo pair must meet. The default is 10. | Double |
Maximum Intersection Angle (in degree) (Optional) | The value, in degrees, that defines the maximum angle the stereo pair must meet. The default is 90. | Double |
Minimum Area Overlap (Optional) | The percentage of the overlapping area over the whole image. The default is 0.5. | Double |
Maximum Omega/Phi Difference (in degree) (Optional) | The maximum threshold for the Omega and Phi difference between the two image pairs. The Omega values and Phi values for the image pairs are compared. If the difference between either the two Omega or the two Phi values is above the threshold, the pairs will not be formatted as a stereo pair. | Double |
Maximum GSD Difference (Optional) | The threshold for the maximum GSD between two images in a pair. If the resolution ratio between the two images is greater than the threshold value, the pairs will not be built as a stereo pair. The default is 2. | Double |
Group by (Optional) | Builds the stereo model from raster items within the same group, defined by a mosaic dataset field such as RGB, Panchromatic, or Infrared. | Field |
Only pick stereo models in the same flight line
(Optional) | Specifies how the stereo models will be selected.
Note:This parameter is not applicable to satellite-based sensors. | Boolean |
Derived Output
Label | Explanation | Data Type |
Updated Mosaic Dataset | The updated mosaic dataset. | Mosaic Dataset; Mosaic Layer |